Dual relay module (basic version) for modular Archimedes / Archiduino.
The card is equipped with two relay 2A 36V max. In addition, there are two signaling LEDs to indicate the logic state of the corresponding relay.
The card is designed to make relays working in interlocked mode (optional) and to be able to insert a delay on the implementation of hardware control (optional), so you do not change the logic state of the relay in the event of a reset of the CPU board.
Alternatively to the 2 relay board, in case you need a higher power device, in the space of the slot it is possible to mount a single relay 10 A max. By mounting the single relay, on the terminal are available both the NO and NC contact.
The module is designed to be inserted in a modular DIN rail mounting (6 modules). The container allows you to move from the development phase of the software (on the bench) to end use in the field with a simplicity and speed not found in other programmable platforms.
About Archimede and Archiduino
Archimede is an Open-source, .net microframework programmable platform based on the Cerberus card’s firmware by GHI Electronics.
Archiduino is a modular, programmable controller, 100% software compatible with Arduino Leonardo. The strength of the systems Archimede / Archiduino is constituted by the plurality of interface modules, I/O channels and signal conditioning, at his disposal, which can be simultaneously mounted.